15 Reasons You Must Love Ghost Immobiliser 2 > 문의하기

Ghost Immobiliser 2

Guards your vehicle against key cloning and stops thieves from driving your vehicle with the keys you originally had. Our most recent immobiliser connects to your vehicle's CAN data network & the unique PIN code needs to be entered in order for the engine to start.

Ghost, unlike trackers, does not emit radio frequency signals, and therefore cannot be detected by diagnostic tools. It also has no indicators in the form of LEDs or buttons that give away its presence within your car or van.

Anti-key cloning

The ghost immobiliser has been designed to combat key cloning and hacking. This device connects to the CAN data network in your vehicle and creates a unique pin code push sequence by using the factory buttons on your dashboard and the steering wheel. This stops the thief from being able to start your car. If the incorrect PIN is entered, it will stop your engine from running and making it impossible to drive off with your pride and Joy.

Ghost immobilisers employ a new technology which is extremely difficult for thieves to beat. Contrary to physical deterrents, such as wheel locks and steering locks which can be cut or stolen The ghost immobiliser is an invisible electronic device that isn't detected by common thieves, as it doesn't emit radio signals and works silently.

The new generation of immobiliser is able to protect your car from a range of threats like cloned keys, key-hacking and even relay attacks. It also has the ability to stop the thief from adding a new key or replacing your ECU by ensuring that it does not allow them to start your car without entering the correct PIN code before entering.

Contrary to other immobilisers, the ghost immobiliser 2 does not require any additional key fobs or remotes in order to operate. It can be deactivated through an app on the smartphone of the driver. This is perfect for the time you have to give your car to valet parking, or maintenance without keys.

The Autowatch Ghost-II represents the latest version of the Ghost immobiliser. It is designed to be as simple and easy to use as it is possible, while remaining as secure as ever. This is done by linking the Ghost-II into the vehicle's data network CAN, meaning that there are no additional wires to hide or be easily identified. It has built-in features that allow you to disarm the Ghost-II simply by connecting to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the newest method employed by professional car thieves to steal cars. Thieves are able to access your vehicle's OBD port with little more than an laptop, an app, and a few cables which can be bought online for Impartial-mango-fhcxk9.mystrikingly.com/blog/the-leading-reasons-why-people-perform-well-on-the-auto-ghost-immobiliser under PS50. Once they have access, they can do anything they like including resetting your vehicle's fault codes, tuning your vehicle, or stealing it in under a minute.

It can protect your vehicle from being stolen by requiring a specific PIN code to be entered along with your key fob prior to you start the engine or drive away. It does this by interacting with the vehicles ECU (Engine Control Unit) via the CAN Data circuit and is indetectable to any code grabbing or RF scanning technology. It even comes with a Service/Valet option that allows your vehicle to be started without the need for a PIN code.

To use an OBD hacking device you need to have an operating system that is capable of interpreting the OBD protocol. This can be purchased for under PS100 on ebay or Amazon. You'll also require cables with OBD pins that are connected to the CAN bus. These can be purchased on Amazon or Ebay for around PS50. Then, you need to splice the cable into the wire harness of your vehicle for example, in the radio wiring harness.

Once the hacker gains access to the OBD port of your vehicle, they will send diagnostics to the system at a high baud rates which can cause a crash to the car's CAN and stop the systems from working. This could cause the engine to stall or even lock doors, and even the brakes to engage.

No additional key fobs or [Redirect-Java] remotes required

An immobiliser for your car is a excellent piece of anti-theft technology that is used by billions of modern cars all over the world. Using engine ECU software to prevent vehicles from starting if a fake transponder signal is sent to it an aftermarket immobiliser can be an excellent method of protecting your vehicle.

However, it can be easy for thieves to get around an immobiliser system if they have access to the code that allows them to disable it. A thief could easily remove the battery from most key fobs by squeezing them open. They can then use an instrument to remove the internal circuit board from an immobiliser and replace it with a blank. Then, they will be able to start your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser communicates with the engine ECU (Engine Control Unit) via a subtle quiet data circuit in CAN that is unnoticeable with diagnostic tools such as the ones employed by high-tech thieves. It also does not use a traditional key-fob with LED indicators, which means it can go undetected at sight.

You may need to deactivate Autowatch's Ghost 2 automatic protection at certain times like valet parking or a service. The ghost CAN immobiliser has a dedicated mode for this, called "Service Mode which can be activated with the touch of an app on your phone. The vehicle can still be operated however, its maximum speed will be restricted to 36 mph for added security.

Contact us today to schedule an appointment for a demonstration in our workshop. A member of our team will provide the entire process of the process and provide you with owner manuals, installation certification, Ghost 2 emergency card and a security guarantee.

Simple PIN code change process

Ghost is the next-generation device that protects your car without cutting wires or installing aftermarket key fobs. It connects directly with the vehicle's CAN data network. A personal PIN can be programmed using buttons on the steering wheel and dash. The device does not emit RF signals, therefore it is unable to be manipulated. This makes it unrecognisable by sophisticated RF scanning or code grabbing technology that modern thieves employ.

The PIN code can be changed to block previous drivers, or even add an override code in case you forget the sequence. During installation the installer will show how to do this. The system has a valet-mode feature that can be used to temporarily disable pin input sequences, so that your garage or mechanic can work on the vehicle without knowing the code. This is a great option for those who don't want their PIN sequence to be divulged, but wish to leave their car with valet parking or service.

Unlike Thatcham products that require additional key-fobs in order to operate, Ghost is a discreet system that makes use of the buttons in your vehicle to create a unique interchangeable PIN code sequence. The sequence is entered using the smartphone app. No extra LED indicators are thrown, and your vehicle is protected without possibility of being disabled.

Every vehicle is tested

Contrary to key fobs which require you to press buttons and a ghost immobiliser can be discretely placed under your steering wheel or dash so that you don't even know it's even there. The device is connected to your vehicle's CAN data network and the personalised PIN code is programmed into it using existing buttons on your car. The system will then stop your engine from running until the code is entered first. This means that thieves are unable to copy the keys to your vehicle or gain access to the OBD to hack into it.

ghost immobiliser installation is a feature that can be found in all vehicles including electric vehicles, motorhomes, vans and bicycles. It's also extremely versatile and can be programmed to shut down in various scenarios. For example, it can be programmed to go into Valet mode when the car is taken to a valet parking or service company. This allows you to drive within the 30mph limit and the ghost immobiliser will turn on itself when the vehicle returns to your home.

The device can be reset at any time to your personal PIN code. This is great if you lose the code or if the device becomes unusable.

It's also important to note that the device is completely unnoticeable to anyone who isn't familiar with it. It does this by running through the buttons on your steering wheel and dashboard and analyzing the data it sends to identify the exact button that was activated. This makes it a secure and solid security system that is not able to be manipulated by RF scanning, jamming, or even a door lock pick set.