10 Misconceptions Your Boss Has Concerning Sash Window Repair > 문의하기

Sash Window Repair

Sash windows can go out of balance and crack. Pam is on the lookout on the internet for salvaged wavy glasses, and keep an eye out for discarded sashweights made of metal. She then searches for replacements in the form of nuts or washers to ensure that her window is balanced.

Pam covers each pan with a rope of glazing compound she puts into the rabbet groove or pocket, which is located around the opening. This helps to reduce drafts and costly heat loss.

Sashes that stick Sashes

When your double-hung window gets stuck, it's a nightmare. They'll rattle in the event of an icy storm and you'll lose view. A upvc window repairs that's too loose may allow air and noise in which could increase your energy bills. Both scenarios are not optimal, but both can be addressed with the appropriate tools and perseverance.

A common issue with old windows that are weighted is that paint may get sucked into the channels they slide on, causing them blockage. Most of these problems can be resolved by cleaning and oiling the tracks.

Begin by removing the caulking between the window stop (the internal one) and the window frame. Scrape off any paint that has built up. Make use of a sharp knife and place plastic sheets and dust-collecting vacuum cleaners below the surface to collect any paint dust or chips.

Clean the tracks with a dry cloth and apply a silicone lubricant for more smooth sliding. You can purchase this in many home improvement stores or on the internet. You can test it by moving the sash either upwards or downwards.

If it continues to stop it could be faulty. Examine the sash cord to determine if the cord is catching or hanging from the sash, or has snapped off completely. You'll need to re-cord your window If this is the case.

Another possible reason for the jam could be the pin that holds the meeting rail in place has fallen out. This can be tricky to fix, and you'll need to contact a professional in most cases.

If a pin isn't falling out but the wood has gotten warped or swollen, it's a good idea use a wood hardener on it. The liquid is quick drying and can help restore damaged wood. You won't have to take out your sash windows to repair them. After you've used it you'll be able pry the two sashes apart by placing a block of wood on the top of the corner where they meet and tapping it lightly with a Hammer.

Draughts

Draughts can cause problems with sash windows that are old, especially during the winter. They can be caused by rotten wood, broken putty or worn sash cords. This can allow cold air to enter the window, making it more difficult to warm your home. You can prevent drafts by filling the gaps with expanding foam or using draught-excluding strips found in many hardware stores. These are effective however you'll require replacing them regularly as the foam expands over time with use.

A more permanent option is Gapseal, a spongy rubbbery seal that you cut to the desired size and then insert into the gaps between your sash window frame. It can be applied on its own or timber with adhesive strips on the top and bottom of the frame. This option is expensive and you'll need to apply it several times over the course of the life of your window. But, it's a long-term fix and is simple to remove.

Cling film can also be used to stop draughts. Simply roll it up and push it into the gaps around your window. This is a reliable draught blocker, but the drawback is that it can stop sash movement completely and pose a fire hazard. Furthermore the sash will have to be removed to open the window again and the cling film has to be applied every time you close the sash.

A better option is to have your window sash professionally draughtproofed as part of a general refurbishment service. This could include the replacement of sash cords as well as staff beads, parting beads, lubrication of pulley wheels and rebalancing of the weights, as well as painting or staining the frames and sashes. This will bring the sash back to its original purpose and improve its energy efficiency and fix any minor imperfections in the wood. It's less disruptive than removing windows, and can reduce draughts, improve the thermal efficiency and dramatically reduce the cost.

Decay

If your windows with sash have suffered decay or damage, the good news is that they aren't necessarily damaged beyond repair. The timber used to construct the frames of these windows is usually of a very high quality and, with proper restoration, they can be restored to offer the best performance for a long time. The key is regularly checking the frames and making sure that the wood is properly ventilated to avoid moisture accumulation which can lead to wood to rot.

The majority of the issues you'll encounter with sash windows will be readily apparent on close visual inspection, but some are harder to spot. Particularly, decay of wood is a very difficult problem to treat because fungus eats away at the wood. It is possible to repair wood that is rotten, however the best way to avoid further rot is to make sure the timber is dry.

The first thing to do is to clean any paint from the hardware. The bottom rail and the meeting rail could have to be removed from the frame (depending on the position of your sash). The "pocket covers", which are small pieces of wood placed on the frame's side that allow access to the weights must be removed. It is possible to use a sharp knife to take them if they are painted or nailed into place. Once the pockets are removed you can begin to chisel out any wood that is rotting, and apply a good quality water-resistant wood filler. Once the filler has dried the primer coat must be applied to prevent further decay.

It is a good idea to check the sash's weights inside the window, too to ensure that they are in balance and not swaying one side more than the other. If they aren't balanced, the sash can drop off its track and could break or damage the frame. The sash weights can be replaced with new ones or a new mechanism for balancing can be installed, which will stop the sashes from swinging to the wrong side of the frame.

Poor Security

Over time, sash windows can become exposed to the elements and prone to deterioration due to weather and timber general wear. This can cause decay of timber, and requires replacement. Water marks on the window or a softened frame could be a sign of decaying wood. It is important to consult a professional to assess the situation and determine if repairs to the window sash are needed.

Over time the rails at the bottom can also be damaged. The sill may show water marks, or a window that is soft to the touch may indicate this. A professional consultation will be required to assess the situation and recommend any needed repair or replacement of window sash components.

It can be very concerning when double and triple glazing windows begin to let noise pollution back into the home. If this happens the structural integrity of the windows could be at risk and it will most likely require to be replaced with an alternative option.

One common window repair issue for sash windows is when the sash gets stuck in the frame. This can be caused by a snapped cord or a problem with sash rattles. If the problem is with the sash's the ratchets, some gentle pressure is usually enough.

This problem can be resolved by taking the sash off and cleaning the tracks. Once the tracks are clean take off any security fittings that could be present and then carefully taking off the sash cords and chains will allow the sash to be removed. A draught seal could be applied around the staff bead to reduce draughts and enhance the appearance of the paint finish. Decorators caulk can be used to fill the gap between the box of the sash and the sash. This will enhance the operation of the sash and also reduce draughts.