8 Tips To Up Your Ghost Immobiliser Game > 문의하기

Why You Need a Ghost 2 Immobiliser Fitting Near Me

Modern criminals can steal a car within a matter of minutes. They use the cars OBD port to hack into the ECU and then duplicate a key, all using an unnoticed laptop inside the car.

An Autowatch Ghost immobiliser prevents this by sending a series of pin codes through the existing buttons in your vehicle (steering wheel and central console). It is completely invisible to anyone else in your vehicle.

No key fobs or LED indications to give away its location

The ghost immobiliser is the most effective way to prevent keyless entry theft and key cloning. This device is designed to guard your vehicle from these kinds of attacks, by preventing the engine once a correct pin code has been entered. This is an extremely efficient method of safeguarding your vehicle, and car insurance companies recognise it as a precautionary measure that can help reduce the cost of your insurance.

The ghost is connected to your vehicle's CAN data network. Once it is installed by Car Theft Solutions, it will only work if you enter your personal code for override and a specific button combination. This means that any attempt to start the vehicle without entering this code will be greeted with a loud siren, and the engine will not start. The criminal then realizes they are being taken prisoner and will likely leave the vehicle.

One of the major advantages of this system is that it does not transmit any signals, like trackers, which means that thieves can't utilize RF signal receivers in order to pinpoint the location of your Ghost device. It also doesn't emit any IR (infrared) signals, like the usual remote key fobs to control the device or trackers do, which makes it very hard to bypass or hack.

The Ghost also has valet-mode which is activated if you are giving your vehicle to a valet for parking or service. This will disable the immobiliser CAN for 30 mph and allow you to drive in normal fashion using your key fob. The Ghost will function fully when the vehicle is returned to its parked position.

If you'd like to find out more about the ghost or want us to install it in your vehicle, please contact us at Car Theft Solutions today. We are a family-owned and run business with over 10 years of experience in vehicle security, including the Ghost immobiliser installation. We are an approved installer for Ghost products and our reputation is built on the satisfaction of our customers.

No hacking or cloning

The Autowatch Ghost is one of the most advanced immobilisers available on the market. It protects your car from key cloning or hacking making it virtually impossible to steal. The only way to steal your car is physically tow it away. Even then, they won't be able to start the engine.

This is because unlike other immobilisers which only prevent the vehicle from starting if they don't have your fob this innovative system actually cuts off your engine control unit so that the vehicle can't start. It works by sending a signal to buttons on your steering wheel and door panel, as well as your centre console that can only be deactivated by entering the correct pin code This feature that makes the Ghost impossible to break.

Its discreet and sleek design allows it to fit seamlessly into your vehicle without any additional keys or LED indications and it operates independently of your alarm system or tracker from factory. It also functions as a CAN bus immobiliser which means that it sits within the control area network of your vehicle and doesn't interfere with any existing devices like the built-in key fob or alarm.

Unlike other systems that depend on codes grabbing or RF scanning this technology is undetectable to thieves because it only transmits a silent sequence of pin codes through the buttons that are already present on your vehicle's steering wheel doors, door panels, or the central console. The Ghost is a revolutionary product that shields your vehicle from theft of keys that are keyless and smart key theft. It does this by creating a unique pin code, that must be entered to disarm the device.

The number of vehicles with keyless entry on the road is increasing. Thieves are getting more sophisticated and use cloning devices which can be bought online or in classifieds for under PS15. The cloned key fob could be used to gain access to the vehicle. A standard immobiliser for vehicles only stops the engine from running only if you have the original key fob. This does not offer enough security and it is easy for criminals to steal or block signals to unlock the vehicle.

Valet mode

Standard immobilisers installed to your vehicle use an electronic chip to send an indication. The system will then look for the code that was sent by the key to begin the vehicle. If the correct signal cannot be received the system will shut off the power and stop the vehicle from starting. This is the basic principle behind all aftermarket immobilisers and is a crucial security measure to ensure that your car can't be stolen even if a thief has your keys or a device that could boost your key fob signal.

But a ghost immobiliser doesn't just stop it however, it goes far beyond that. The system, which is located on the CAN bus of your Mercedes, is programmed with a unique PIN code push sequence that must be entered in order to start the vehicle. The app is then locked your app and no one will ever be able to access it unless they have the same unique pin number that you have.

The system will also stop cloning, signal jamming and hacking (which thieves could employ to bypass the immobiliser in your car). If a thief manages to get their hands on your car keys or key fob, they won't be able start your vehicle even if it's in a nearby parking lot. The only way they could get your car away would be to physically take it away in the flatbed of a lorry which is extremely unlikely.

Valet mode comes as a standard feature with your ghost immobiliser. When it is activated the glove box and trunk of your car will be locked. This means that anyone attempting to take your car away will not have anything valuable to take. It will also restrict the speed of your Tesla so that it is unable to be driven at over 70mph and will disable ludicrous mode. It will also lock your driver profiles and hide your home / work addresses so that no one else can access the private information on your Tesla dashboard.

If you would like to use your vehicle for valet parking, or service, choose the 'Valet/Service' mode on the dashboard app. Enter your 4-digit valet code on the touchscreen. The alarm won't work, however the car will not start unless you enter a valid pin. This is perfect for people who need to give their car over to others like garage mechanics and taxi drivers.

The first-ever aftermarket immobiliser for the CAN bus

The Autowatch ghost car immobiliser is the first aftermarket CAN bus immobiliser and provides security that is unmatched by any other product available today. It safeguards your vehicle from key cloning, hacking and even key theft. This is accomplished by working alongside your vehicles current interface. It doesn't require additional fobs or remotes however, it instead connects to the vehicle's data network CAN. This makes it a "stealth device.

The device is a circuit board hidden in your car's engine control unit (ECU). It works quietly. Once activated, it will stop the car from starting unless a PIN is entered. This is a unique code you will receive when you book an installation. This number is needed to activate valet mode, turn off the alarm or allow you to drive away in your friends car (if they have a Ghost installed too).

It is designed to ensure that it can't be seen by anyone who is looking at your car's interior. it doesn't transmit radio signals, and can only be heard when it's being activated. It can be put in a variety of locations and is nearly impossible to detect. It is also low-maintenance and can be fitted in conjunction with other systems, such as a tracker (Brand dependant) to provide a more complete anti-theft solution.

Many people choose to install an immobiliser ghost because they feel that the standard security measures are not sufficient to protect their pride and joy. Whilst physical deterrents like wheel locks for steering wheels and wheel clamps are an excellent alternative, they aren't really considered "theft proof" by thieves as they can be beaten easily using the right tools. A ghost immobiliser is not bypassable by thieves as it is integrated into the vehicle and, if activated would shut down the starter motor or fuel system.

The most appealing aspect is that a ghost immobiliser can be installed as low as PS450, which is a fraction of the cost of other products available on the market. And it actually does protect your vehicle from being stolen! If you're looking to provide an extra layer of protection to your pride and joy, contact us today so we can book it in for you. We accept credit card payments and offer a three-month interest-free credit with Klarna.