5 Autowatch Ghost Immobiliser Fitting Lessons Learned From Professionals > 문의하기

Ghost Immobiliser Installation

Add a ghost immobiliser to your vehicle to protect it from thieves. Our TASSA-certified system is safe from key cloning, hacking, and also vehicle immobiliser bypass.

The system is hidden inside the wiring loom of your vehicle and is inaccessible to anyone who is looking. It operates by creating pin code push sequences by using buttons already present on the steering wheel, door cards, and the centre console.

No circuit cuts

A car is a valuable asset that you put in hours of work to acquire, so it's understandable why car owners would want to secure their vehicle against theft. However, traditional security devices like alarms and wheel locks can easily be snatched away or jumped by thieves. Ghost immobilisers, on the other hand is a highly efficient solution that works silently and cannot be detected by modern thieves.

Ghost immobilisers are hidden device that connects to the CAN data network in your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle by using buttons on the dash, steering wheel and door panels. This generates a unique pincode that is only accessible to you. The code can be changed at any time and can be up to 20 digits long depending on your preference. It also comes with a safe emergency code that you can use in case you forget your PIN.

The ghost immobiliser can be used to prevent a relay box from transferring the car key's signal inside your home, which will unlock the doors and then start the vehicle. It could even block techniques of stealing your car such as OBD port hacking. The device is tiny and weatherproof, meaning it's hard to spot and is also difficult to alter with.

Another advantage of the ghost immobiliser is that it can be installed to your vehicle without permanent marks. This is ideal for people who plan to resell their car in the future. It's also faster and simpler to install as when compared to a factory-fitted model.

The Autowatch Ghost is a groundbreaking next-generation device that prevents contactless stolen cars by connecting to the vehicle's CAN data network and using the existing buttons to generate a unique PIN code. This is a stealthy device that can be put in with no wires cut and doesn't require any additional key fobs. It is also connected to the original ECU of the vehicle, preventing thieves bypassing it with a new key. This system has been TASSA-verified and can be linked with an International Security Register. Owners will be able to rest easy, ghost immobilisers knowing that their vehicles are secured from theft.

No scanning by RF

If you've put an enormous amount of time and money in the customization of your vehicle, you will want to protect it from theft. Installing an immobiliser is among the best ways to stop theft. It will prevent your vehicle from starting until you enter a unique code. You can create a 20-digit pin using the buttons on your dashboard and steering wheel. This will ensure that only you are allowed to drive your car. It is also possible to set up a service and valet mode that allows you to start your car for a short period without entering the PIN code. This will allow your technician to work on your vehicle without you being there. This is a great option for people who want to save time and make their lives easier.

Ghost immobilisers are next generation device that connects to your vehicle's CAN data network and utilizes the buttons on the steering wheel and dashboard to programme a personalised PIN code. It is designed to be stealthy, with no LED indicator or noise to make it obvious, and can be fitted anywhere on your vehicle without disturbing the aesthetics of your pride and joy.

This stealthy system is approved by TASSA and could lower your insurance costs. It comes with a tracking feature that will locate your vehicle, even if it's been stolen. This is helpful if you have a costly or rare vehicle that you have invested many hours making it your own.

Autowatch Ghost, in conjunction with the iPhone application allows you to remotely start your vehicle in the event that you've forgotten your PIN number or are unable to access your vehicle. This feature is great for when you have to pick up the kids or run errands, but don't want to risk someone else driving your vehicle. It's also useful when you have to take your vehicle in for servicing or repair.

The Ghost has the advantage that it does not transmit or detect radio frequency, so it is undetectable by thieves using RF scanning and code grabbing technologies. It can also safeguard your car from key cloning and ECU swapping, which are typical methods of theft from cars.

No key to cloning

Ghost immobilisers are a fantastic option for protecting expensive vehicles. They are designed to stop key replication. They prevent your car from being started unless a PIN code is entered along with the standard key fob. This makes it difficult for thieves to steal your vehicle, and may stop them from trying it in the first place. This is a good idea if your vehicle has been heavily customized or if it's a rare model.

These immobilisers connect to the vehicle's CAN data network and are completely hidden meaning there is no indication of its presence inside the vehicle. The device is also difficult to identify using radio frequency scanning technology or code grabbing. This means that a burglar would have to spend more time to take your vehicle.

To bypass the system a thief must be aware of the pin code and the location of the Ghost. The pin code is unique to you and can change it as often as you want. The pin code is simple for you to remember but mathematically unattainable for someone else to figure out. Additionally, the engineer will provide you with an emergency pin code override in case you forget the pin.

The Ghost CAN bus immobiliser is weatherproof and easily installed in any part of your vehicle. It works with all vehicles and fully customisable to match the style of your car. It is also simple to use and affordable. You can even transfer the device to another vehicle if you change cars during the lifetime of ownership, Ghost immobilisers provided that the new vehicle is compatible with it.

The immobiliser on the CAN bus is compatible with a variety of other security features. It is able to, for instance, detect damage to the vehicle and notify the owner. It can also shut off the engine if it senses that the car has been damaged. The system also protects your vehicle from key cloning and hacking. It can also detect vibrations and contact with the vehicle. It can also alert the owner when the vehicle is moved.

No OBD port hacking

Ghost uses an immobiliser that is hidden and connected to the CAN data network of your vehicle which stops thieves from gaining access to your vehicle to disable the alarm, deactivate the key fob and generate new keys. This technology is a step up over the traditional methods employed by thieves to steal vehicles in the past. The CAN data network means that the system will not be affected by disconnecting or replacing your battery.

The Autowatch Ghost is the first immobiliser for CAN bus aftermarkets in the world, protects against key-cloning, hacking, and replica car theft. It doesn't use LED indicators or key-fobs. Instead, it uses the buttons on your steering wheel, console, and door panels.

Modern thieves are able to employ diagnostics to find circuit breaks on your vehicle. They can bypass immobilisers that require a large amount of wiring or are integrated in the wiring. The Ghost is weatherproof, does not require additional wiring and isn't detected by professional diagnostic tools. It can be even installed on vehicles that are fitted with anti-theft devices.

A Ghost immobiliser comes with a major benefit: your vehicle can only be started by a person who knows your PIN and has physical access to your vehicle. This is an advantage over traditional security systems that are easily manipulated with screwdrivers or cable tampering.

You can easily reset your PIN in case you forget it by using the emergency PIN override feature on a computer or mobile phone. This is helpful if you need to start your car after it has been left in a garage or by using a valet parking service.

The Autowatch Ghost 2 has been approved for insurance by TASSA and can be installed by our authorized installers. It features an RFID fingerprint system that can identify parts that are not in use that allow for the return of stolen items in the event that they are found. It can also be switched to'service mode,' which allows the engine to start when your car is in a garage, or with valet parking, but you will need to enter your PIN again to exit the vehicle.