This Week's Top Stories About Car Ignition Lock > 문의하기

Why is My Car Ignition Locked?

There are many reasons why the ignition of your car could be locked. The key may be dirty or may have a damaged wafer inside it. You can fix this by sliding the key into and out of the cylinder many times.

Another possibility is that the pins inside the lock cylinder have become stuck. You could tap the cylinder lightly with a small tack-hammer.

Check the Battery

If the car is in Park or neutral, but doesn't come on when you insert the key into the ignition, there may be a problem with the shifter switch for the transmission. It is possible to fix the issue by shifting the gear shifter up or down to get the vehicle into the correct gear.

If it's not turning, the problem may be with the neutral safety switch or transmission shifter cable. These can be easily fixed by a mechanic or a local automotive locksmith.

The ignition cylinder can also wear out. Over time, the ignition and the key can wear out, which causes them to become difficult to remove or insert. A lubricant such as silicon lock lubricant can help solve this problem by allowing the silicon wafers to slide into the place.

The filth from your pockets and adhesive from the tape that holds packages together can build on the key, which prevents it from being able to slide into the ignition. To solve this problem try cleaning the keys with a cloth or using a cleaner like Triflow. You can also try a spare key to determine if the problem is with the ignition or the key.

When the key is in ignition, you can tap it with a a small piece of hammer. This will create a tiny vibration, which may be enough to loosen the wafers inside the ignition and let them slide into the right position. You should be careful not to harm either the ignition cylinder or the key.

If all of the above solutions fail, it's likely to contact a locksmith or automotive mechanic to have it examined. The key could be damaged in the cylinder of ignition, or it might be time to replace it completely. If the problem is with the key, a locksmith can create a new key for you. If the ignition cylinder is the issue, you will need to bring the car to a repair shop for Car Ignition Locked it to be replaced. Fortunately, these issues are generally easy to solve.

Examine the Steering Wheel

A steering wheel that is locked can cause the ignition to not turn. It can happen when drivers accidentally engage the steering wheel when they exit or get into the vehicle. This is typically caused by pulling the wheel while resting it against their body. It can also happen if someone in the rear seat has a mishap and engages the brakes while they exit the vehicle.

This is a quick solution that doesn't require going to the locksmith or mechanic. First, ensure that the shifter is either in Park or Neutral. If it isn't, Car Ignition Locked simply push or pull the shifter gently until it moves into one of these positions. It's also important to press the brake or turn on the handbrake prior to trying to turn the key.

If the wheel isn't locked, a quick check of the steering column should reveal if the key is engaged with the lock cylinder. A small "Lock label can be found in the lower portion the ignition and key replacement circle. It is possible to disengage this by gently jiggling or pulling the key with moderate force. It is crucial not to apply too much pressure, as this could cause damage to the key or damage a wafer inside the lock cylinder.

A spare key may also be used to deactivate the lock. This could indicate that the key is worn and cannot engage the wafers in the lock cylinder. If this is the case then a professional at Karl Chevrolet Webster City will be able to create an alternative key.

If the key still doesn't engage after spraying the penetrating lubricant it may aid. Apply a small amount of oil around the ignition and inserted keyhole, then tap or jiggle it until it starts to engage. If this doesn't help you, you might need to consult a specialist in your local dealership for cars. They can provide you with a replacement key and replace the ignition cylinder, if required.

Check the Key

If you're unable to get your key to turn the ignition, it's possible that something is wrong with your key. You can try removing any foreign material from the key (lint and adhesive from packing tape, etc). You should also try rubbing alcohol or Goo Gone on the key to see if this can help.

It is possible that the internal lock pins aren't working properly when you insert the key. You can test an extra key by gently removing it of the ignition after you put it in. You should be able to hear and feel the pins moving inside. If not, you could apply lubrication to the pins using graphite powder. You can buy graphite in small tubes that can be squirted directly into the keyhole. This should help the pins slide into position when you insert the key, and keep them from getting stuck.

A more serious issue with your key could be that it has become worn or damaged which makes it ineligible to engage the internal pins inside the ignition cylinder. This can cause the cylinder of ignition to not to turn, which can prevent you from starting your car. If this happens you'll need to take your vehicle to repair or locksmith shop for assistance.

If you're able to turn the car using an extra key and you've eliminated any issues with the steering wheel or battery it could be because the ignition cylinder is worn out. It is possible to loosen the lock cylinder using the sharp end of a screwdriver or handle of the hammer (not the head). Often, tapping gently on the cylinder can free it and allow you to turn the key of your car. If this doesn't work, you will need to have the lock cylinder replaced by an expert mechanic.

Check the Ignition Socket

The ignition socket is the place where your key is inserted and removed when inserted. It can get clogged up with dust, or simply wear and wear and tear. You can inject some silicon lock lubricant in the ignition.

You can also use a small hammer and tap gently on the inside of the ignition to try to loosen or reset the pins that are out of alignment. Be careful not to overdo it as you could cause serious damage to the ignition switch.

Before you do this, ensure that the gearbox of your car is in neutral or park. Many newer cars come with an option to lock the steering wheel if it is not in neutral or park. This can prevent the ignition key from being turned.

If you have tried all of these methods and your key doesn't turn, it could be that the ignition key replacement housing needs to be replaced. Different vehicles have different methods for replacing the ignition cylinder. Therefore, it is crucial to follow the correct procedures.

This usually involves removing the plastic covering that covers the steering column and the ignition assembly. To remove it, you will need to first adjust the tilt-wheel to the lowest setting and then loosen any fasteners that are holding it in place.

Once the cover has been removed, you'll have to take the old ignition cylinder from the steering column. It is then necessary to check the new one that you have purchased with the original one to ensure that they are a perfect match. Once this is done the new ignition cylinder is able to be installed in the same way that the previous one was removed.

Sometimes, despite our efforts, the ignition may become damaged and require replacement. It is recommended that when this happens you contact a Tempe Locksmith. A locksmith can help determine the correct replacement and ensure it is installed correctly to ensure that your vehicle will begin again.