Everything You Need To Be Aware Of Replacement Window Handle > 문의하기

Choosing uPVC Replacement Window Handles

Most customers agree that the replacement handles made of upvc are easy to install and feel good. It's crucial to understand that the handle you select for your window has to be suitable for the window.

The primary factor is the step height that refers to the space between the nose of the handle to the base or frame. Other considerations include lockable designs and mechanisms.

Replacement parts

You can buy a variety of replacement upvc handles. They are available in a variety of colours and styles so there's sure to be something to suit your windows. It's easy to purchase a product on impulse particularly when the handle breaks. Therefore, it is best to do some research before buying the replacement. The first step is to be aware of the kind of upvc handles you own and what the differences between them. The table below lists the most commonly used handles to help you identify the one that fits your windows made of upvc.

Espag handles are the most popular and are found on most modern double glazing window replacement glazed windows. They are usually affixed to the frame using two screws that are screwed into the frame from both sides, above and below.

They have a spindle bar on the back, which can be of a variety sizes. This will determine how they work (either left or right handed). It is essential to know the measurements of the handle you must ensure that you order the appropriate replacement.

The arm is attached to the frame using two bolts, just like the Espag handle. The arm has a lower projection, so that it won't poke your blinds. This is an ideal choice when you have blinds on your windows made of upvc and want to ensure that the handle will blend in with the blinds.

Cockspur handles are similar to Espag handles, however they have a nose that closes over a wedge which sits on the frame of the window. This kind of handle can be found on older wooden and Upvc windows.

On casement windows tilt and turn handles can be operated by turning the handle or pressing the top of window. The window is opened from the inside and allows you to clean outside without having to go to the ladder or walk over the garden fence. They're ideal for those with limited mobility, and can enhance security and access to the home.

Tips and hints

There are a number of different types of uPVC window handles, and many people will find themselves replacing them at some moment. It is important to know a few tips and tricks that will make the job easier.

The first thing to do is determine the type of handle you have at home. Depending on what the handle is attached to and in my area what locking mechanism it utilizes it might be necessary to replace the entire handle and lock. For example, if the shoot bolts (espag) and roller cams are jammed or seizing, you will need to replace them as well as the handle itself.

Fortunately, the majority of uPVC handles are very similar and conform to industry standards for size, which makes replacing them a relatively simple process. First, you must remove the screws that cover the handles. These are usually pozidrive screws. After the screws have been removed then you'll be able to remove the handle.

It's a great idea keep track of how much the spindle extends from the base of the handle after you take it off it. This will help you measure the length of the spindle to determine a replacement handle. To do this, simply take a measurement of the square peg that sticks out from the base of the handle and use that as a reference.

This is especially important for inline uPVC window handles because they will always be straight and can only open from left or right, and will not operate in the middle. It's a good idea in the event that you are not sure what kind of handle you have in your home, to borrow a handle to see how it functions.

Another excellent way to figure out what the handed of the uPVC window handle is is to look at the way the handle turns when operating. Handles that are hand-operated will turn clockwise or counter-clockwise. If you are unsure then ask someone to open the window using the handle and observe how it works.

Measure the spindle

The selection of the right replacement handle for your windows could be a challenge as different handles are not identical in size. The spindle is the part that controls the locking mechanism inside the window. It is important that when you fit a new handle, you measure the spindle length accurately to ensure that it fits. There are many different kinds of uPVC window handles and they operate in different ways so it is essential that you know which kind of handle you have and the type of locking system that you are using.

The spindle of the handle extends out from the handle's rear and is connected to the lock gearbox inside the window frame. When you turn the handle, this turns the lock within the gearbox, and opens the window. They are typically used on uPVC windows with casement. They can be locked with keys to increase security.

Cockspur handles are equipped with an "nose" that closes over an elongated striker block that is placed on the frame and they are usually found on older double-glazed uPVC windows. They are also easy to use and can be locked using keys. It is more difficult to replace these handles because they aren't as common as the handles with espagnolette.

If you have a tilt-and-turn uPVC then you'll require a new handle that has a different locking mechanism. The handle will tilt the window and allow it to be turned back and forth to fully open it. You will need to ensure that the handle you choose has a spindle length of at least 55mm or it will not be able to reach into the frame of the window.

The same procedure can be used to remove and replace the uPVC handle. But, you'll have to be careful when removing it. It may be necessary to open the window a bit wider than usual to reach both screws that attach it to the frame. Once you have put in your new uPVC handles and verified that they are in the correct position, you can tighten up the screws and then test the lock to ensure it works properly.

Replace the handle with the new one.

Once you have the correct replacement handle, it should be easy to screw it into place. This will require a screwdriver, but may be easier with an electric one. It is crucial not to overtighten the screws when screwing them in. This could cause the knob or handle to swell.

The second step in fitting the new handle is to install the spindle. This is the part that runs through the handle and operates the locking mechanism inside the window. It is important that the part is fitted correctly, as this will allow the window to open and shut securely.

There are several different types of uPVC window handles. They include:

Espagnolette Handles - These are inline handles that can be used to windows that tilt and turn to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle but have a curvaceous design that can be useful for windows in difficult-to-access locations.

Tilt and Turn Handles - These are used on tilt and turn windows for operating the opening and closing mechanisms.

The majority of uPVC window frames are equipped with these. They are often called 'Bay Windows' In my area the UK.

If your uPVC window handle is broken it can be a major hassle. There is no need to change the entire uPVC windows because of a broken window handle. There are a number of simple ways to repair and replace a damaged uPVC window handle.

You can repair your broken window handle swiftly by identifying the type and measuring the spindle. It is crucial to be patient and ensure safety when working with windows and tools but this is a straightforward task. It can mean the difference between having a safe and secure home or a window that is easily opened. If you have any questions or would like to speak to a specialist about replacing your window handle, contact Bridgewater Glass. We have a team that is knowledgeable and experienced to help you with any issue.