9 Things Your Parents Taught You About Repair Patio Door Lock > 문의하기

How to repair patio door a Bad Patio Door Lock

A secure patio door is essential to home security. If your door becomes difficult to lock, it can be a nightmare.

In many instances, a lock that is difficult to open is the result of an incorrect alignment or simply wear and tear. Lubricating the lock, or adjusting its position can help restore its function. If these solutions aren't working, you can replace both the mortise and handle.

Clean and Lubricate

Over time, dust, dirt and grime can make it difficult to open and close the door lock. Regular cleaning and lubrication can help to prevent your security device from becoming stiff or stuck. This will save you money in repair patio door lock costs and prolong the life of your door.

To begin, you'll have to clean the lock's the cylinder. Use WD-40 or another penetrating spray to do this. Spray a small amount of it into the keyhole, then work the key through and out to spread the oil. Avoid using household solvents or other oils that could damage your locks, and make sure to spray a bit on the key itself.

Once your lock cylinder is clean it's time to lubricate. You can apply dry lubricants like graphite powder or sprays of silicone. Graphite is a lubricant that lasts for a long time that doesn't attract dust unlike liquid fluids. It's an excellent choice for locking lubrication. Silicone sprays are water resistant and can withstand moist and freezing temperatures, however it may require several coats to work effectively.

You can also apply sprays to de-icer your lock, which is specifically made for cold weather and will lift frost and ice off the lock mechanism. A few sprays of this will aid your lock unlock and then re-lock more easily.

How often you need to lubricate your locks will rely on environmental factors. A coastal location exposes your door to salty air, which can cause corrosion, and temperature changes can affect how well your lock works. The most common rule of thumb is to grease your locks twice per year and more frequently when you live in an area that experiences harsh weather conditions. Lubricating your locks can save you money on repairs and ensure your patio door lock repair near me door continues to perform as it should for the years to come.

Reposition the Lock Cylinder

If your patio door lock doesn't work properly there's a chance that one or more of its parts could be damaged or misaligned. Regular inspections and prompt repair of a faulty lock on your patio door could help prevent further damage and guarantee the security of your doors. You can fix doors that are locked or locked by tightening loose screws, altering the lock mechanism or replacing the lock cylinder.

Start by examining the exterior and interior of the lock for indications of damage or misalignment. Patio door locks may expand or contract depending on the weather, and might even shift with time. This slight movement can cause the locking mechanism to stop aligning correctly and lead to problems with opening or closing the patio door.

Next, examine the lock cylinder for obstructions within the keyway hole. An obstructed or corroded lock cylinder may be difficult to open and could eventually cause damage to the pins of the lock, cams or latch springs. If the cylinder is difficult to insert, you might be able to dislodge any obstructions with a pair of tweezers, or a picklock. If the issue persists, you might need to remove the cylinder in order to locate the source.

If the lock cylinder has not been screwed to the body of the lock, it can be loosen by unscrewing the screw on the cylinder faceplate. Unscrewing this screw will allow you to rotate the cylinder and could aid in restoring alignment.

Look for an elongated tab that is movable with the key. It is usually at the end. This little clip, called a "release tab" is what keeps the cylinder from sliding patio door repairs all the way into the lock body. A standard key can move the tab back to let the cylinder out and allow it to be removed and put back in.

If your lock cylinder has become stuck and is not aligned, you can fix it by rotating the cylinder until the latch bolt engages the strike plate. The knob or handle can then be pushed, and withdrawn. Reassemble the lock once you have restored alignment. Test it for functionality. If your patio door lock still isn't functioning properly, it is likely that an additional component such as the latch spring or latch must be replaced.

Lock the Screws

Locks for patio doors can be damaged by frequent use, extremes of temperature dust and dirt. These delicate parts may wear out if not properly maintained, leading to your door to not lock properly. Fortunately, most lock issues can be fixed easily by following a few easy maintenance steps.

You should first clean the lock mechanism. Use a damp cloth remove any dirt or dust that may be present and then dry the parts thoroughly. After cleaning, a small amount of silicone-based lubricant can help keep moving parts running smoothly and efficiently. Avoid lubricants that have oil bases as they can attract dust and debris, which can cause further problems.

If your patio door is fitted with an electronic footlock for security, make sure that the footlock is aligned properly with the strike plate. In most cases this will require you to adjust the screws that secure your foot lock to the frame of the double glazed patio door repairs door. To adjust the footlock simply loosen the screw using the help of a Robertson screwdriver and gently pull it up or down. After the adjustment has been completed then tighten the screw.

The most frequent issue in the repair of patio door handles is misalignment of the latch and strike plate. This can be caused by everyday wear and tear or it could be that the latch is positioned higher or lower than it ought to be.

Begin by removing the old handle, then find the screws or bolts that hold it in place. Be sure to keep track of these as you will require them when installing the new handle. Then, take off the old spindle and slide the new one on the interior of the door. Make sure that it is properly aligned with the holes in both the interior and exterior handle. Reinstall the interior and external handles once the spindle is been installed. Make sure that they're aligned correctly with the bolts or screws to secure them.

Close and secure the patio door after you have made any necessary adjustments. If everything is in proper alignment, the door will open and close smoothly without any additional force. If you're still having problems, you may need to adjust the position of your latch or strike plate or replace the lock cylinder.

Replace the Latch

If your patio door locks still aren't working, it could be time to replace the latch. Installing a new lock is a relatively simple home improvement project that most homeowners can do themselves. Begin by sliding patio doors repair the patio doors all the way out and removing the existing lock on the inside of the door. Be sure to study the way in which the current lock is screwed into the door and jamb so that you can determine the kind of lock you'll need to purchase.

Before installing the new latch, loosen screws that secure the strike plate. This is the portion of the lock mounted on the edge of the door's frame. Adjust it horizontally or in the vertical direction to align it with the holes for the latch. Once you've repositioned the strike plate, screw it into its place and tighten the screws.

After all components have been moved or adjusted then assemble and secure the patio door according to the instructions of the manufacturer. When you're done, check the latch to ensure that it fits and catches the latch's hasp when the door is closed. If it does, then your patio door lock has been put in place correctly and is able to provide the security and privacy that you have come to expect.

Patio doors, like other components of your home should be properly aligned to function efficiently. Over time, heat cold, dirt and debris can cause the hinges and the frame of the door to shift. If these components are not aligned it's similar to trying to fit a key into the wrong keyhole it won't work. By following these simple steps, you will be able to fix a problem that might have seemed unfixable. Give yourself a pat on your back for tackling the task and reclaiming the patio door's closed position! We're sure you won't have any more trouble opening or closing the door from here on out. Have fun! We are here to help should you require assistance or have questions.