Subaru Car Keys Tips That Will Change Your Life > 문의하기

How to Programming a Subaru Key Fob at Home

Depending on how brand new your subaru key fob programming is, you might need to have the key fob programmed by a dealer or an automotive locksmith. This is accomplished by connecting a computer-based programming machine to your car.

To program your Subaru begin by opening the driver's door using the door button control, and then shut it. You will hear a chime in the instrument panel, and the dome lights will blink.

Step 1: Locate the circuit board on your transmitter

There are several ways to program your key fob. First, you need to know which kind of key fob you have. You can determine this by taking a look at the shape of your key fob or by listening to your car for a chime.

Once you have the information you require, you can start the process of programming your key fob from home. To do this, you will require a key made of metal and a flathead screwdriver. Open the key fob by twisting. Push the metal key into the case and release the battery by pushing the tabs that hold it in place. Replace the battery and then put the case back together.

Step 2: Remove the key fob case

It is a good idea to change the batteries in key fobs in case they're not functioning. In some cases the buttons on the key fob might be broken. If you notice that the contacts made of metal on the button are loosened try soldering them back in place to allow them to function once more.

Be sure to turn off your ignition and close your doors before you begin. You can do this by closing your driver's side door and pressing your door button ten times in quick succession. Then, you'll hear the instrument panel chime, and your dome lights will flash. This indicates that you're prepared to move forward.

Step 3: Insert the key fob into the ignition

Many online articles will tell you how to get a new subaru key to program your new or replacement subaru key cost (yogicentral.science) Subaru keyfob at home. But, the majority of them don't provide specific instructions. Programming an electronic key is best handled by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver’s seat, with all doors closed and the engine turned off. Use the door button to unlock all of the doors. Close and open the door to the driver's side two more times. Insert and remove the ignition key (don't rotate it) 10 times over 40 seconds. The system will chirp to confirm that the settings have changed.

Step 4 Step 4: Turn on the ignition

It is crucial to understand that this method of programming a key fob works if you already have a working key. If you do not, then a dealership or auto locksmith will be required to program a new key for your Subaru in Fort Bliss.

After the key is programmed, it should be in a position to start your vehicle within about five seconds. Begin by closing the doors and then shutting off the engine. Next, sit in the driver's seat and unlock all doors with the door button control. Place the key into the ignition and turn it on to the first position (the electrical systems will come on but the engine remains off) then return to the off position ten times in rapid succession.

Step 5: Unlock the Driver's Door

Subaru offers many high-end cars with key fobs which lock and unlock doors, turn on the engine, and defrost windows. However, sometimes, these devices stop working properly.

Find a locksmith or dealer to fix the issue. This will resolve the issue and ensure that your vehicle is safe.

To do this, open the driver's door and close it. Then, you need to place the ignition key in and switch it to the initial position. Then, reverse it to the off position. Repeat this ten times in one row as fast as you can. After the tenth repetition you should hear an audible sound.

Step 6: Press the Lock/Unlock Button on the Driver's Door

If you are looking to replace the battery inside the Subaru key fob, the procedure is straightforward. The fob's case on the outside is opened. Then you can use a flathead screwdriver to push open the inside of the case and take out the old battery.

After removing the battery to replace it, you can replace it with the new one. Close the case. Then, get in the driver's seat and unlock all the doors using the door button control. Put the key in the ignition and turn it so that the electric system is on, but the engine is off. Repeat this ten times in a row until you hear the chime on the instrument panel. This will put the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button.

For certain owners, the irritating noise that occurs when locking and unlocking a subaru impreza key fob key fob from outside the vehicle could be distracting. In some instances, the chirp can be turned off by closing and opening all doors and a double click of the lock button on the key fob.

Close all doors, including the lid for the fuel-filler, and turn off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. The instrument panel emits a sound when this is achieved. The chime signals that the lid of the fuel-filler door are locked. It is possible to change the setting so that the doors lock automatically without having to push a switch.

Step 8 Step 8: Enter the 8-digit Transmitter Number.

Note down the first series of 8-digits, and keep it in your wallet. Now, climb into your driver's chair, close all doors and then turn the key to the first position (towards on). After 10 turns, your instrument panel will sound once.

The circuit board for the transmitter is located inside the key fob case. The circuit board should have one or two 8-digit numbers. Take note of the first sequence of numbers, and follow the instructions in this guide to register the code on the system of your vehicle. For older models, this procedure might require a visit to the dealer.